Mixer with thermostatic head for automatic adjustment of water temperature in the tap

If you constantly regulate the temperature of the water when taking a shower (it is either hot or cold) or you want to lower the outlet temperature of the water heater, then you need a mixer with a thermostatic head. Because manually adjusting the water temperature is not as accurate as compared to the thermostatic elements of the head, which simply will not supply hotter water at the outlet of the mixer than you adjusted on the handle.

Thus, a faucet with a thermostat allows you to obtain a stable, comfortable water temperature at the outlet and eliminates the possibility of scalding with hot water. The thermal head is also equipped with a fuse that prevents children from turning on hot water (from 38 degrees or more).

The mixer is mounted after water heaters, such as a boiler, gas boiler, water heater, and can supply water further into the system at a predetermined comfortable temperature, which is set by turning the head.

Simple connection: hot water inlet, cold water inlet, regulated water outlet. The mixer already has check valves built into it, so there is no need to install additional devices in the system to prevent the backflow of water.

Characteristics:

- Type: Thermostatic mixer;

- Adjustment range: 20-48 °C;

- Adjustment accuracy: ±2 °С;

- Mixing principle: single-valve (thermostat for water);

- Body material: brass;

- Valve type: ceramic;

- Inlet: 1/2";

- Type of pipe connection: rigid;

- Operating temperature: cold water 5-29 °C, hot water 50-95 °C;

- Working pressure: 0.03-1.0 MPa;

- Recommended pressure: 0.1-0.5 MPa;

- Throughput: 11.67 l/min at a pressure of 1 bar;

- Size: 9.2 x 12 cm.

- Weight: 430 g.

Equipment:

1 x Thermostatic mixer with built-in check valves.