Electric switch 220V for 4 channels complete with control panel

The four-channel 220 Volt switch is designed for remote control of electrical appliances, devices, lighting equipment, etc. A compact remote control made in the form of a key fob is used for control. The model has a high degree of safety and is well protected from voltage surges. Thanks to the learning system, up to 12 remote controls can be connected to the device.

Receiver (switch):

- Operating voltage: 85V-250V;

- Maximum current: 10A;

- Maximum load: up to 1000 Watt;

- Operating frequency: 315MHZ;

- Receiver sensitivity: -105Db;

- Operating temperature: -20'C - +60'C;

- Programming type: Training.

Remote control (transmitter):

- Operating voltage: DC12V;

- Operating current: 30MA;

- Operating frequency: 315MHZ;

- Working distance: 20~200m (open area)

(Please note that the operating distance is based on the complete absence of any physical obstacles. Each obstacle reduces the distance by 10-50% of the specified values.);

- The model is notable for its more stable and safe operation compared to other 220V wireless switches;

- Features low power consumption in standby mode. Total 10MA.

Included:

- 4-channel switch for remote control;

- Remote control in the form of a keychain (battery included).

Programming method (adding/removing remote controls):

1. Press the learning button and hold until the indicator starts flashing. Then press any button on the remote control. The indicator will light up twice and turn off. This will mean that the pairing process was successful.

2. The device can be paired with 12 wireless remote controls.

3. To remove all paired remote controls from the device’s memory, press the pairing button and hold it for about 8 seconds until the indicator goes off completely. This will mean that all connected remote controls are deleted from memory and the connection is terminated.