GSM security alarm GSM017 with wireless sensors to protect your property

GSM security alarm system supports both wireless and wired sensors. Wireless sensors are included, making installation simple and accessible to anyone. For the alarm to work, you need to insert a SIM card from any mobile operator, mount the wireless sensors on the wall and, using simple key combinations on the panel keyboard specified in the instructions, specify the numbers to dial and notify when the alarm is triggered.

- Supports 99 wireless and 2 wired zones;

- The alarm unit has a convenient LCD display with blue backlight. The screen displays the date and time, the current alarm status, and using the screen and keyboard you can easily configure the wireless alarm;

- The alarm is configured by entering commands (specified in the instructions) using the buttons on the alarm panel, or using SMS commands. There are no difficulties, any user can figure it out. Moreover, the standard set is already ready for use; you just need to indicate your phone number for notification;

- There are three ways to arm/disarm the alarm:

1). using the radio key fobs that come with the kit;

2). using a call from a mobile phone (the machine picks up the phone and after entering the PIN code, you can arm/disarm the alarm by pressing buttons. Button 1 - arm, 2 - unset. 3 - listen to what is happening at the facility. 4 - intercom , two-way communication with the object) or using SMS commands;

3) using the buttons on the alarm panel. Arming is done by pressing the “Arm” function button, after which the time starts counting down so that the owner can leave the premises. After 2 minutes, the alarm will automatically be armed. Withdrawals are made by entering a numeric PIN code and pressing the # button. It is also possible to configure the zone in which the sensors are located in the corridor with a delay of 40 seconds. Thanks to this, you will be able to enter the room and enter the PIN code within 40 seconds. If the PIN code is not entered, the alarm will go off;

- Panic button function. There is an SOS button on the key fobs, as well as on the alarm panel. When you press this button, an immediate response will occur and notify the owner. This feature is useful both for security in the event of an attack and for caring for the elderly;

- The owner can add up to 6 numbers (mobile or landline) for alert calls in case of an alarm;

- You can also set up to 3 mobile numbers for SMS notifications;

- There is a function of informing about each fact of disarming a specific phone number for control;

- If the alarm is in security mode, then when there is a power outage at the site, you will automatically receive an SMS notification about this from the alarm, as well as when the power is restored again;

- Intercom or monitoring function via mobile phone, i.e. using a call you can hear sounds from a protected object or have a two-way communication session;

- Built-in battery that will ensure continuous operation of the alarm when the power is turned off (up to 5 hours of operation);

- Using the keypad on the alarm system, you can make calls from it via speakerphone (gsm dialer);

- There are functions for automatically arming or disarming at a specified time, for example, arming at 18.00 and disarming at 8.00;

- Function for checking the level of mobile signal communication with a GSM operator. If the signal is low, you can install the central unit in a more suitable location;

- Programming of each zone: 1. Zone type: - real-time triggering, - triggering with a 40 second delay, - 24 hours a day security, - intersection sensors. 2. Placement of the security zone: - SOS alarm button, - fire sensor, - gas leak sensor, - door sensor, - room sensor, - window sensor, - balcony sensor, - perimeter security sensor. 3. Siren triggered: set whether the siren is active when sensors in this zone are triggered or not;

- For example, you program a zone with fire sensors and gas leaks as a zone with security 24 hours a day. Moreover, if the sensor is triggered, the alarm will sound a siren and will call or send SMS messages to the owner, regardless of whether the alarm was armed or not. This is very convenient, because even at this time you can be at a protected facility, but somewhere in one of the premises a fire or gas leak will start, and you will immediately know about it, as the alarm will go off;

- Possibility of arming with the “Home Owners” option (separate button on the remote control): you can program individual zones so that they do not work. For example, sensors installed inside the house will not respond to activation, but sensors in the garage and windows will be active;

- Possibility of recording 10 seconds of the owner’s speech, which will sound before the notification (for example, the address of the object for the police, etc.);

- Additional wireless sensors: motion sensors, door openings, gas leaks, water leaks, smoke detectors, panic buttons, perimeter control, wireless sirens can be added to this alarm system. Additional sensors can be purchased from us separately; their number is selected based on the characteristics of the protected object;

- Also, this alarm system is suitable for protecting a country house, store, garage, etc.

Specifications:

- Voltage: 9V-12V DC;

- Operating frequency: 433 MHz;

- GSM frequency: 850/900/1800/1900 MHz;

- Operating distance of wireless sensors: 100 m;

- Siren power: 120 dB.

The kit includes:

- GSM security alarm (central unit) - 1 pc.

- Remote control - 2 pcs.

- Wireless motion sensor - 1 pc.

- Wireless door or window opening sensor - 1 pc.

- Wired mini siren - 1 pc.

- Power adapter - 1 pc.

- User manual - 1 pc.

Attention! The price is for the alarm without the original color packaging. The alarm kit will be sent in a regular cardboard box. If you need original packaging, it will cost more. When ordering, please clarify this question.

Other possible names for this product: gsm alarm for home, wireless gsm alarm for home, alarm for garage, install the alarm yourself, gsm dialer